Install cavity sliding door
It just couldn’t be simpler with Cavity Sliding Door!!

Install cavity sliding door. The fantastic thing about pocket doors is that you don’t have. To have a big hole in the wall for the frame and you don’t have to knock down the wall either.

The pocket door system can be install against the existing wall.

This is done by creating a false stud wall along the side of your existing one. With a space for the frame. The cavity siding door is only 90mm wide including plasterboard. And you will not lose lots of space in the room. Another great advantage of the sliding pocket system. Is that it comes complete with ALUMINIUM  POCKET connected to the track. This way it is always perfectly in line unlike the old systems. That are basically a few bits of wood and a track.

This is also a great time saver!

Also after the quick and easy assembly you just have to screw a sheet of plasterboard to the side that butts up to the wall. This gives the system extra strength and rigidity.

Now to screw the system into space you have left in the false stud wall only use screws through the track. The back end of the pocket also the base of the pocket to keep the system in-line. Don’t screw through the side of the frame as this may cause the system to misalign and you don’t want that.

So, once screwed and fixed into position add the final plasterboard on the outside of the false wall, follow the instructions on installing the door and finish off with the architrave of your choice.

Simple as taking the dog for a walk!

Leave a Reply

Your email address will not be published. Required fields are marked *