Sliding doors get tacky and hard to open when the wheels are messed up or the track gets grimy. Here’s how to repair your sliding door and replace a feeble screen.
Adjust Rollers
To start your sliding glass door adjustment project, first lift or lower the door on the track with a screwdriver or Allen wrench. Raise it barely enough to clear the track and roll easily. Locate the two adjusting screws at the bottom of the door (on the face or edge of the door) and pry off the trim caps that cover the screws. On the off chance that one side looks lower, raise it until the door looks even on the track. On the off chance that the door sticks, turn the two screws a quarter go to raise the entire door. At that point slide the door barely shy of the jamb and be certain the gap is even.
Eliminate Stop Shaping
Eliminate the screws that hold the stop shaping. Cut the paint or varnish line on the room side of the stop forming so the trim will pull off cleanly. If the door doesn’t coast easily, you’ll have to eliminate the door and examine the rollers. Find support for this—the door is heavy! Unscrew the stop forming within the jamb. Make certain to hold the door in place once the stop is eliminated—on the off chance that you fail to remember and walk away briefly, the door will fall in, requiring a lot greater repair!
Lift the Door Out
Grasp the door by the edges and tip it about a foot into the room. Lift it up and out of the track each edge in turn. Slant the door back and set it on sawhorses. Assess the rollers for issues.
Replace the Roller
If the rollers, or sliding glass door wheels, are brimming with earth and garbage, give them a decent cleaning and a couple of drops of lubricant and check whether they turn unreservedly. However, if the rollers are worn, cracked or bowed, eliminate them and replace them with another pair. Unscrew and pry out the fasteners that hold the roller, at that point carefully switch it out with a screwdriver. Clean or replace the rollers. New rollers for repairing sliding doors are available through door manufacturers or online providers, in any event, for more established doors.
Years of earth, openness to the components and hard use can transform sliding doors into staying doors. Here’s how to repair your sliding door and make it run like new. Sliding glass door repair will take care of business. Start with a decent cleaning. Clean caked soil and grime out of the track with a firm brush and soapy water. On the off chance that the door doesn’t slide easily, the rollers under the door either need adjusting or are shot.
